/usr/bin/python3
+ sudo apt -y install wget tree gawk g++ ninja-build cmake libreadline-dev libssl-dev libffi-dev zlib1g-dev

WARNING: apt does not have a stable CLI interface. Use with caution in scripts.

Reading package lists...
Building dependency tree...
Reading state information...
g++ is already the newest version (4:12.2.0-3).
g++ set to manually installed.
The following additional packages will be installed:
  cmake-data libarchive13 libicu72 libjsoncpp25 libncurses-dev libncurses6
  librhash0 libsigsegv2 libuv1 libxml2
Suggested packages:
  cmake-doc cmake-format elpa-cmake-mode gawk-doc lrzip ncurses-doc
  readline-doc libssl-doc
Recommended packages:
  libgpm2
The following NEW packages will be installed:
  cmake cmake-data gawk libarchive13 libffi-dev libicu72 libjsoncpp25
  libncurses-dev libncurses6 libreadline-dev librhash0 libsigsegv2 libssl-dev
  libuv1 libxml2 ninja-build tree wget zlib1g-dev
0 upgraded, 19 newly installed, 0 to remove and 0 not upgraded.
Need to get 27.4 MB of archives.
After this operation, 106 MB of additional disk space will be used.
Get:1 http://deb.debian.org/debian bookworm/main amd64 libsigsegv2 amd64 2.14-1 [37.2 kB]
Get:2 http://deb.debian.org/debian bookworm/main amd64 gawk amd64 1:5.2.1-2 [673 kB]
Get:3 http://deb.debian.org/debian bookworm/main amd64 wget amd64 1.21.3-1+b2 [984 kB]
Get:4 http://deb.debian.org/debian bookworm/main amd64 libicu72 amd64 72.1-3 [9376 kB]
Get:5 http://deb.debian.org/debian bookworm/main amd64 libxml2 amd64 2.9.14+dfsg-1.3~deb12u1 [687 kB]
Get:6 http://deb.debian.org/debian bookworm/main amd64 libarchive13 amd64 3.6.2-1 [343 kB]
Get:7 http://deb.debian.org/debian bookworm/main amd64 libjsoncpp25 amd64 1.9.5-4 [78.6 kB]
Get:8 http://deb.debian.org/debian bookworm/main amd64 librhash0 amd64 1.4.3-3 [134 kB]
Get:9 http://deb.debian.org/debian bookworm/main amd64 libuv1 amd64 1.44.2-1 [140 kB]
Get:10 http://deb.debian.org/debian bookworm/main amd64 cmake-data all 3.25.1-1 [2026 kB]
Get:11 http://deb.debian.org/debian bookworm/main amd64 cmake amd64 3.25.1-1 [8692 kB]
Get:12 http://deb.debian.org/debian bookworm/main amd64 libffi-dev amd64 3.4.4-1 [59.4 kB]
Get:13 http://deb.debian.org/debian bookworm/main amd64 libncurses6 amd64 6.4-4 [103 kB]
Get:14 http://deb.debian.org/debian bookworm/main amd64 libncurses-dev amd64 6.4-4 [349 kB]
Get:15 http://deb.debian.org/debian bookworm/main amd64 libreadline-dev amd64 8.2-1.3 [151 kB]
Get:16 http://deb.debian.org/debian bookworm/main amd64 libssl-dev amd64 3.0.11-1~deb12u2 [2430 kB]
Get:17 http://deb.debian.org/debian bookworm/main amd64 ninja-build amd64 1.11.1-1 [136 kB]
Get:18 http://deb.debian.org/debian bookworm/main amd64 tree amd64 2.1.0-1 [52.5 kB]
Get:19 http://deb.debian.org/debian bookworm/main amd64 zlib1g-dev amd64 1:1.2.13.dfsg-1 [916 kB]
debconf: unable to initialize frontend: Dialog
debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (This frontend requires a controlling tty.)
debconf: falling back to frontend: Teletype
dpkg-preconfigure: unable to re-open stdin: 
Fetched 27.4 MB in 0s (222 MB/s)
Selecting previously unselected package libsigsegv2:amd64.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 24975 files and directories currently installed.)
Preparing to unpack .../libsigsegv2_2.14-1_amd64.deb ...
Unpacking libsigsegv2:amd64 (2.14-1) ...
Setting up libsigsegv2:amd64 (2.14-1) ...
Selecting previously unselected package gawk.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 24984 files and directories currently installed.)
Preparing to unpack .../00-gawk_1%3a5.2.1-2_amd64.deb ...
Unpacking gawk (1:5.2.1-2) ...
Selecting previously unselected package wget.
Preparing to unpack .../01-wget_1.21.3-1+b2_amd64.deb ...
Unpacking wget (1.21.3-1+b2) ...
Selecting previously unselected package libicu72:amd64.
Preparing to unpack .../02-libicu72_72.1-3_amd64.deb ...
Unpacking libicu72:amd64 (72.1-3) ...
Selecting previously unselected package libxml2:amd64.
Preparing to unpack .../03-libxml2_2.9.14+dfsg-1.3~deb12u1_amd64.deb ...
Unpacking libxml2:amd64 (2.9.14+dfsg-1.3~deb12u1) ...
Selecting previously unselected package libarchive13:amd64.
Preparing to unpack .../04-libarchive13_3.6.2-1_amd64.deb ...
Unpacking libarchive13:amd64 (3.6.2-1) ...
Selecting previously unselected package libjsoncpp25:amd64.
Preparing to unpack .../05-libjsoncpp25_1.9.5-4_amd64.deb ...
Unpacking libjsoncpp25:amd64 (1.9.5-4) ...
Selecting previously unselected package librhash0:amd64.
Preparing to unpack .../06-librhash0_1.4.3-3_amd64.deb ...
Unpacking librhash0:amd64 (1.4.3-3) ...
Selecting previously unselected package libuv1:amd64.
Preparing to unpack .../07-libuv1_1.44.2-1_amd64.deb ...
Unpacking libuv1:amd64 (1.44.2-1) ...
Selecting previously unselected package cmake-data.
Preparing to unpack .../08-cmake-data_3.25.1-1_all.deb ...
Unpacking cmake-data (3.25.1-1) ...
Selecting previously unselected package cmake.
Preparing to unpack .../09-cmake_3.25.1-1_amd64.deb ...
Unpacking cmake (3.25.1-1) ...
Selecting previously unselected package libffi-dev:amd64.
Preparing to unpack .../10-libffi-dev_3.4.4-1_amd64.deb ...
Unpacking libffi-dev:amd64 (3.4.4-1) ...
Selecting previously unselected package libncurses6:amd64.
Preparing to unpack .../11-libncurses6_6.4-4_amd64.deb ...
Unpacking libncurses6:amd64 (6.4-4) ...
Selecting previously unselected package libncurses-dev:amd64.
Preparing to unpack .../12-libncurses-dev_6.4-4_amd64.deb ...
Unpacking libncurses-dev:amd64 (6.4-4) ...
Selecting previously unselected package libreadline-dev:amd64.
Preparing to unpack .../13-libreadline-dev_8.2-1.3_amd64.deb ...
Unpacking libreadline-dev:amd64 (8.2-1.3) ...
Selecting previously unselected package libssl-dev:amd64.
Preparing to unpack .../14-libssl-dev_3.0.11-1~deb12u2_amd64.deb ...
Unpacking libssl-dev:amd64 (3.0.11-1~deb12u2) ...
Selecting previously unselected package ninja-build.
Preparing to unpack .../15-ninja-build_1.11.1-1_amd64.deb ...
Unpacking ninja-build (1.11.1-1) ...
Selecting previously unselected package tree.
Preparing to unpack .../16-tree_2.1.0-1_amd64.deb ...
Unpacking tree (2.1.0-1) ...
Selecting previously unselected package zlib1g-dev:amd64.
Preparing to unpack .../17-zlib1g-dev_1%3a1.2.13.dfsg-1_amd64.deb ...
Unpacking zlib1g-dev:amd64 (1:1.2.13.dfsg-1) ...
Setting up libicu72:amd64 (72.1-3) ...
Setting up wget (1.21.3-1+b2) ...
Setting up gawk (1:5.2.1-2) ...
Setting up libffi-dev:amd64 (3.4.4-1) ...
Setting up ninja-build (1.11.1-1) ...
Setting up libuv1:amd64 (1.44.2-1) ...
Setting up libncurses6:amd64 (6.4-4) ...
Setting up libssl-dev:amd64 (3.0.11-1~deb12u2) ...
Setting up tree (2.1.0-1) ...
Setting up libjsoncpp25:amd64 (1.9.5-4) ...
Setting up zlib1g-dev:amd64 (1:1.2.13.dfsg-1) ...
Setting up librhash0:amd64 (1.4.3-3) ...
Setting up cmake-data (3.25.1-1) ...
Setting up libxml2:amd64 (2.9.14+dfsg-1.3~deb12u1) ...
Setting up libncurses-dev:amd64 (6.4-4) ...
Setting up libarchive13:amd64 (3.6.2-1) ...
Setting up libreadline-dev:amd64 (8.2-1.3) ...
Setting up cmake (3.25.1-1) ...
Processing triggers for libc-bin (2.36-9+deb12u3) ...
+ set +x
+ sudo apt -y install busybox-static mksh zsh

WARNING: apt does not have a stable CLI interface. Use with caution in scripts.

Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
  zsh-common
Suggested packages:
  zsh-doc
Recommended packages:
  ed libpcre3
The following NEW packages will be installed:
  busybox-static mksh zsh zsh-common
0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded.
Need to get 6555 kB of archives.
After this operation, 22.9 MB of additional disk space will be used.
Get:1 http://deb.debian.org/debian bookworm/main amd64 busybox-static amd64 1:1.35.0-4+b3 [927 kB]
Get:2 http://deb.debian.org/debian bookworm/main amd64 mksh amd64 59c-28 [573 kB]
Get:3 http://deb.debian.org/debian bookworm/main amd64 zsh-common all 5.9-4 [4147 kB]
Get:4 http://deb.debian.org/debian bookworm/main amd64 zsh amd64 5.9-4+b2 [908 kB]
debconf: unable to initialize frontend: Dialog
debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (This frontend requires a controlling tty.)
debconf: falling back to frontend: Teletype
dpkg-preconfigure: unable to re-open stdin: 
Fetched 6555 kB in 0s (115 MB/s)
Selecting previously unselected package busybox-static.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 28900 files and directories currently installed.)
Preparing to unpack .../busybox-static_1%3a1.35.0-4+b3_amd64.deb ...
Unpacking busybox-static (1:1.35.0-4+b3) ...
Selecting previously unselected package mksh.
Preparing to unpack .../archives/mksh_59c-28_amd64.deb ...
Unpacking mksh (59c-28) ...
Selecting previously unselected package zsh-common.
Preparing to unpack .../zsh-common_5.9-4_all.deb ...
Unpacking zsh-common (5.9-4) ...
Selecting previously unselected package zsh.
Preparing to unpack .../zsh_5.9-4+b2_amd64.deb ...
Unpacking zsh (5.9-4+b2) ...
Setting up zsh-common (5.9-4) ...
Setting up busybox-static (1:1.35.0-4+b3) ...
Setting up mksh (59c-28) ...
update-alternatives: using /bin/mksh to provide /bin/ksh (ksh) in auto mode
Setting up zsh (5.9-4+b2) ...
Processing triggers for debianutils (5.7-0.5~deb12u1) ...
Processing triggers for initramfs-tools (0.142) ...
update-initramfs: Generating /boot/initrd.img-6.1.0-15-amd64
W: No zstd in /usr/bin:/sbin:/bin, using gzip
I: The initramfs will attempt to resume from /dev/vda2
I: (UUID=ac890c30-30e0-4f8c-b0df-da3502518963)
I: Set the RESUME variable to override this.
+ set +x
'_tmp/shells/ash' -> '/usr/bin/busybox'